400 Amp Generac RTS-400 240V 2Pole 1PH Automatic Transfer Switch
- 1 Year / 1,000 Hour Limited Warranty (Whichever comes first)
- U.L. Listed
- Dimensions (L\" x W\" x H\"): 36" X 24" X 10"
- 2 Pole
- Amps: 400
- Weight (Pounds): 95
- Enclosure: NEMA 3R
- Phase: Single Phase
- Voltage: 120/240 Volt
*FOR USE WITH GUARDIAN ELITE GENERATORS ONLY*
Generac RTS automatic transfer switches are designed to operate with the Generac R-100 controller used on the 3.0 and 3.9 liter Guardian Elite gaseous generators. The transfer switches are UL 1008 listed for standy operation.
The standard 100-400 amp transfer switch is housed in a steel NEMA 3R enclosure with electrostatically applied powder paint. The Heavy Duty contactor is a UL recognized device designed for years of service. The connection between the RTS and the Generator control consists of (4) #14 control wires and a neutral wire. The Service Entrance rated transfer switches have a UL Listed Mainline Circuit Breaker ahead of the contactor for full downstream protection.
Utility voltage drop-out: <60%
Timer to generator start: 15 seconds
Engine warm up delay: 10 seconds
Standby voltage sensor: 90%
Utility voltage pickup:>80%
Re-transfer time delay: 15 seconds
Engine cool-down timer: 60 seconds
Exerciser: 15 minutes every 7 days
Specifications may vary. Confirm full specs prior to ordering.
Get More Information:
File Size: 31.852 Kb